Adapteri i konektori

- With this adapter, you are able to easily connect your Macbook, Ultrabook, Notebook/Laptop or PC with USB Type C interface to a Gigabit Ethernet LAN network - This converter is a cost effective solution to convert a USB 3.1 Type C port into a 10/10

- Adds 3 additional USB 3.0 ports that support transfer speed up to 5Gbps, 10 times faster than USB 2.0 - Adds Gigabit Ethernet network connectivity that supports transfer speed up to 1000Mbps - Compact and light - Plug and Play - Enhanced Stability

Monitor: not availableKeyboard/mouse: not availableAudio: not availableLAN: 3x 1000Base-TResolution: not available

Features - Works at 1000Mbps in Full-Duplex mode for both TX port and FX port - Supports auto MDI/MDIX for TX port - Provides switch configuration of Force /Auto transfer mode for FX port - FX port support hot-swappable - Extends fiber distance up to

Chipset: RTL8153 Portovi: Output: 3 x USB-A 3.0 Ports 1 x Gigabit Ethernet Port Input: 1 USB-A 3.0 Connector Dimenzije: 31 x 23 x 96 mm

- The TL-SM5110-SR is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300m or 33m with 50/125

- Supported Media: Multi-Mode Fiber - Connector Type: 2× LC - TX Wavelength: 850nm - RX Wavelength: 850nm - Data Rate: 1.25 Gbps - Cable Distance: 550m

- 24 unshielded ports - The panel complies with the EIA/TIA 568 TSB40a standard - The cable connection on the back is implemented via LSA-plus connection technology with colour coding on the top in accordance with EIA/TIA 568 A/B - Colour: Black - Sh

- Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x - Basic Function: * Adopts WDM technology * Half/Full-Duplex transfer mode for FX port * Full Duplex Flow Control (IEEE 802.3x) * Half Duplex Flow Control (Backpressure) * Link Fault Pas

- S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM - Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD,

1000BASE-T RJ45 SFP Module - Extend your copper connection by up to 100 meters Gigabit Port for a High-Speed Connection - Transmit data seamlessly up to 100 meters* between your SFP interface and the copper gigabit port. Plug and Play - A plug-and-

•Solid and reliable terminations for copper cabling featuring a minimum of 3 mm 50 micro-inch gold-plated jack contacts •Compatible with both 110 and Krone punch-down tools •Supports 22 to 26 AWG stranded and solid wire •For use with unshielded twist